So either the piston-rings are completely shot and are leaking that much oil back up into the inlet, in which case the engine wouldn't run... or it's one heck of a stuck CCV. In this case, it would appear the crankcase-vent valve has stuck closed, which is allowing pressure to build up and pump oil back through the clean side of the CCV-system, dumping it right into the top of the throttle-body! Rather than creating a vacuum in the air-inlet that keeps the car at a decent idle, the CCV is pumping combustion pressure instead and covering all the sensors with hot oil. Not good. This is the most poorly engine I've ever seen.
While the throttle-body is off I may as well give it a good clean, along with all the sensors that had filled up to the wiring-connector with the pressurised oil. Even if this doesn't completely clear the rough running faults, it has certainly given the engine a new lease of like and it never does any harm to flush everything out and eliminate any further problems in the inlet.
No comments:
Post a Comment